Briquetting press Cube 20
Cube 20 is a briquetting press that will be a very good helper with low failure rate and high resistance. If you do not know what to do with sawdust or shavings, here is the ideal solution. We present our novelty at Pragoligna in Prague.
Technical data of briquetting press Cube 20
The table below will provide information about important technical parameters of briquetting press Cube 20.
|Type identification:FALACH Cube 20
|Dimensions – lenght – width – height||130 – 74 – 112 cm|
|Briguette diameter||30×30 mm|
|Press capacity||10 – 25 kg/hr.|
|Weight of press||233 kg|
|Hopper volume||0,33 m3|
|Pump motor input||2,2 kW|
|Power consumption||1,1 kW/hr.|
|Specific weight of briquettes||900 – 1100 kg/m3|
|Maximum noise level||62 dB|
The equivalent level of acoustic pressure at the operator´s post does not exceed 70,0 dB ( 62 dB ).
Warranty and post-warranty service of briquetting presses FALACH
FALACH company provides 12 months guarantee on all kinds of briquetting presses FALACH and further agrees to hold customer service 10 years after the warranty period.
Important information when operating briquetting machine
- Prohibition of connecting devices to the divorce, which does not match valid regulations (allowed variation of the nominal amount of power supply voltage is 10%).
- Do not exceed the setting of maximum pressure of 14 MPa.
- Any repair, modification, maintenance and cleaning work is to be carried out when the machine is turned off, disconnected from the power source.
- Do not expose the press to excessively moist environment and protected it against weather conditions.
- When the machine is operating avoid direct contact with moving parts of the press (mainly the front clamp and press die, then the feeding wheel inside the hopper).
- It is prohibited to extinguish press, when energized, with water or foam fire extinguisher, because there is a risk of electric shock (recommended extinguishing powder, snow or halon).
We confirm that this briquetting press FALACH Cube 20 satisfies the conditions of the following specifications and standards:
ČSN EN ISO 12100-1, ČSN EN ISO 12100-2, ČSN EN 60204-1, ČSN EN 61000-6-4, ČSN EN 55011, ČSN EN 982, ČSN EN 954-1, ČSN EN ISO 14121-1.
Are you interested in more information about the briquetting press FALACH Cube 20?
If you are interested in additional information about the briquetting presses, please contact us through our contact form and we shall be glad to answer your questions.